Holds 6 x 1.5 mL or 2.0 mL microfuge tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 6.0 x 4.3 x 3.8 cm / 2.4 x 1.7 x 1.5 in
CoolRack M6 is available in 3 colors
BCS-163, grey
BCS-164, green,
BCS-165, orange
Holds 6 x 1.5 mL or 2.0 mL microfuge tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 6.0 x 4.3 x 3.8 cm / 2.4 x 1.7 x 1.5 in
CoolRack M6 is available in 3 colors
BCS-163, grey
BCS-164, green,
BCS-165, orange
Holds 6 x 1.5 mL or 2.0 mL microfuge tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 6.0 x 4.3 x 3.8 cm / 2.4 x 1.7 x 1.5 in
CoolRack M6 is available in 3 colors
BCS-163, grey
BCS-164, green,
BCS-165, orange
Holds 15 x 1.5 mL or 2.0 mL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Dimensions: 4 x 2.5 x 1.5 in. (L x W x H) / 10.2 x 6.4 x 3.8 cm. (L x W x H)
CoolRack M15 is available in 3 colors
BCS-125, grey
BCS-125G, green
BCS-125O, orange
Made in USA.
Holds 15 x 1.5 mL or 2.0 mL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Dimensions: 4 x 2.5 x 1.5 in. (L x W x H) / 10.2 x 6.4 x 3.8 cm. (L x W x H)
CoolRack M15 is available in 3 colors
BCS-125, grey
BCS-125G, green
BCS-125O, orange
Made in USA.
Holds 15 standard 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Made in USA.
Dimensions (L x W x H): 10.2 x 6.4 x 3.8 cm / 4.0 x 2.5 x 1.5 in
Holds 15 x 1.5 mL or 2.0 mL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Dimensions: 4 x 2.5 x 1.5 in. (L x W x H) / 10.2 x 6.4 x 3.8 cm. (L x W x H)
CoolRack M15 is available in 3 colors
BCS-125, grey
BCS-125G, green
BCS-125O, orange
Made in USA.
Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Holds 15 x 1.5 mL or 2.0 mL microfuge tubes
Made in USA.
Dimensions (L x W x H): 10.2 x 6.4 x 3.8 cm / 4.0 x 2.5 x 1.5 in
Holds one universal 55ml reagent reservoir (such as Labcor, VWRbrand, and others). CoolSink LX55 is a thermo-conductive reagent reservoir holder for universal 55ml reagent reservoirs. The snug fit between the reservoir and the CoolSink LX55 keeps the liquid contents uniformly cold or warm when the CoolSink is placed in direct contact with a temperature source, such as ice, cold plate, hot plate or water bath. Made in USA.
Dimensions (L x W x H): 14.6 x 6.4 x 3.5 cm / 5.7 x 2.5 x 1.4 in
Holds 30 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.Made in USA.
CoolRack M30 is available in 3 colors
BCS-108, grey
BCS-108G, green
BCS-108O, orange
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
CoolRack M30, grayCoolRack XT M24 模块,可放置30个1.5ml或者2.0ml离心管,尺寸:L12*W10.2*H3.8cm 。可以消除样品刚放入冰、干冰、酒精浴、水浴等常用实验室温度源时,温度的不均一性。将CoolRack模块直接放入温度源,模块会迅速适应其温度(从-196℃到+100℃)。它确保所有样品在冷却、冷冻或者加热/融化过程中保持+/-0.1℃的温度均一性。所有模块都可高压灭菌或者酒精消毒。CoolRack模块可以直接放置在冰/干冰上,消除样本管直接与冰的接触,不容易污染,还可以和CoolBox搭配使用,直接放置在冷却核心上,方便保持样本保持低温数小时。Holds 30 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.Made in USA.
CoolRack M30 is available in 3 colors
BCS-108, grey
BCS-108G, green
BCS-108O, orange
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds 30 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.Made in USA.
CoolRack M30 is available in 3 colors
BCS-108, grey
BCS-108G, green
BCS-108O, orange
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds up to 9 x 15 mL centrifuge tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Use ice-free in CoolBox XT workstations. Made in USA.
Dimensions (L x W x H): 13.7 x 9.4 x 11.9 cm / 5.4 x 3.7 x 4.7 in
Holds up to 4 x 50 mL centrifuge tubes
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Use ice-free in CoolBox XT workstations.
Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 10.7 cm / 3.5 x 3.5 x 4.2 in
Holds 45 standard 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Made in USA.
Dimensions (L x W x H): 17.3 x 9.7 x 3.8 cm / 6.8 x 3.8 x 1.5 in
CoolRack XT M24CoolRack XT M24 模块,可放置24个1.5ml离心管,尺寸:L12.8*W8.5*H3.8cm 。可以消除样品刚放入冰、干冰、酒精浴、水浴等常用实验室温度源时,温度的不均一性。将CoolRack模块直接放入温度源,模块会迅速适应其温度(从-196℃到+100℃)。它确保所有样品在冷却、冷冻或者加热/融化过程中保持+/-0.1℃的温度均一性。所有模块都可高压灭菌或者酒精消毒。CoolRack模块可以直接放置在冰/干冰上,消除样本管直接与冰的接触,不容易污染,还可以和CoolBox搭配使用,直接放置在冷却核心上,方便保持样本保持低温数小时。SBS-footprint. Holds 24 x 1.5 or 2.0ml microcentrifuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Use ice-free in CoolBox XT workstations.
Made in USA.
Center of A1 well: .60 inch from left and .54 inch from top
Dimensions (L x W x H): 12.8 x 8.5 x 3.8 cm / 5.0 x 3.3 1.5 in
Holds up to 12 x 5 mL centrifuge tubes
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Use ice-free in CoolBox XT workstations.
Made in USA.
Dimensions (L x W x H): 12.7 x 8.6 x 5.0 cm / 5.0 x 3.4 x 2.0 in
9-well thermo-conductive module for 13x75mm blood tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 6.1 cm / 3.5 x 3.5 x 2.4 in
9-well thermo-conductive module for 16x100mm blood tubes.Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 8.4 cm / 3.5 x 3.5 x 3.3 in
Holds 9 13x100mm blood tubes or 5ml cryogenic vials. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 8.9 x 8.9 x 8.4 cm / 3.5 x 3.5 x 3.3 in
SBS-footprint. Holds one 6-,12-, 24-, 48-, 96-, or 384-well flat-bottom plate.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Precision-engineered "direct contact" stage design virtually eliminates the insulating air gap typically found between the bottom of the plate wells and the temperature source, ensuring well-to-well temperature consistency and no "edge effect."
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Ideal for all benchtop procedures requiring cooling, freezing or thawing such as enzyme reactions, glycerol stocks, FACS staining and analysis in the same plate, RNA and protein isolation, "Dilution" assays.
Use ice-free in CoolBox XT workstations. Made in USA.
Dimensions (L x W x H): 12.8 x 8.6 x 1.7 cm / 5.0 x 3.4 x 0.7 in
CoolRack XT CFT24CoolRack XT CFT24 模块,可放置24个冻存管或12*75 FACS管,孔带锁扣,可单手操作,尺寸:L12.8*W8.5*H3.8cm 。可以消除样品刚放入冰、干冰、酒精浴、水浴等常用实验室温度源时,温度的不均一性。将CoolRack模块直接放入温度源,模块会迅速适应其温度(从-196℃到+100℃)。它确保所有样品在冷却、冷冻或者加热/融化过程中保持+/-0.1℃的温度均一性。所有模块都可高压灭菌或者酒精消毒。CoolRack模块可以直接放置在冰/干冰上,消除样本管直接与冰的接触,不容易污染,还可以和CoolBox搭配使用,直接放置在冷却核心上,方便保持样本保持低温数小时。SBS-footprint. Holds 24 standard 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. "Gripping" well design allows one-hand cryogenic vial opening and closing, regardless of shape or brand of cryogenic vial. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Use ice-free in CoolBox XT workstations. Made in USA.
Center of A1 well: .60 inch from left and .54 inch from top
Dimensions (L x W x H): 12.8 x 8.5 x 3.8 cm / 5.0 x 3.3 1.5 in
CoolRack CFT30CoolRack CFT30 模块,可放置30个1.5ml或2.0ml冻存管或12*75 FACS管,孔带手扣,可单手操作,尺寸:L12*W10.2*H3.8cm。可以消除样品刚放入冰、干冰、酒精浴、水浴等常用实验室温度源时,温度的不均一性。将CoolRack模块直接放入温度源,模块会迅速适应其温度(从-196℃到+100℃)。它确保所有样品在冷却、冷冻或者加热/融化过程中保持+/-0.1℃的温度均一性。所有模块都可高压灭菌或者酒精消毒。CoolRack模块可以直接放置在冰/干冰上,消除样本管直接与冰的接触,不容易污染,还可以和CoolBox搭配使用,直接放置在冷却核心上,方便保持样本保持低温数小时。Holds 30 standard 12.5mm diameter cryogenic vials or 12 x 75 mm FACS tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. "Gripping" wells for one-hand vial opening/closing. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
Made in USA.
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds 30 x 1.5 mL or 2.0 mL microfuge tubes. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Holds 30 x 500 uL microfuge tubes.Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources.
Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples. Made in USA.
Dimensions (L x W x H): 12.0 x 10.2 x 3.8 cm / 4.7 x 4.0 x 1.5 in
Lightweight, insulated module provide cooling for up to 12 x 15 mL centrifuge tubes. The thermo-conductive alloy base and tube wells ensure uniform, consistent and reproducible cooling for all samples. The outer shell is constructed of a durable, highly insulative closed-cell polyethylene foam that allows minimal heat influx while providing a comfortable grip.
The external shell stays firmly attached to the base and tube wells through a magnetic connection at the base seam. To clean, detach the external shell from the base frame. The base frame is autoclavable or can be cleaned with alcohol, 10% bleach solution and most common laboratory detergents and cleaning agents. The outer shell can be cleaned with alcohol, 10% bleach solution, and most common laboratory detergents and cleaning agents.
Cooling on ice
Place CoolRack L module directly on ice in an ice bucket. The CoolRack L module will adapt to
Ice-free cooling
For short-term cooling (approximately three hours): Use CoolRack L module in a CoolBox MP ice-free cooling system. (NOTE: the CoolRack L module is tall and will not allow the CoolBox MP lid to close. However, the CoolRack L module is insulated, thus providing similar performance to a closed CoolBox MP. If lid closure is important, please see CoolBox XT below.)
For long-term cooling (approximately 10 hours): Use CoolRack L in a CoolBox XT or CoolBox 2XT ice-free workstation. Because the CoolRack L module has an insulative outer shell, it is not necessary to close the lid of the CoolBox XT to achieve maximum cooling duration. However, if lid closure is important to your application, please order a CoolBox XT Extension Collar to extend the height of the CoolBox XT workstation and allow the lid to close.
Made in USA. Dimensions (L x W x H): 13.7 x 9.4 x 11.9 cm / 5.4 x 3.7 x 4.7 in
Lightweight, insulated CoolRack LV modules provide cooling for up to 12 13mm or 16mm diameter blood tubes. The thermo-conductive alloy base and tube wells ensure uniform, consistent and reproducible cooling for all samples. The outer shell is constructed of a durable, highly insulative closed-cell polyethylene foam that allows minimal heat influx while providing a comfortable grip.
The external shell stays firmly attached to the base and tube wells through a magnetic connection at the base seam. To clean, detach the external shell from the base frame. The base frame is autoclavable or can be cleaned with alcohol, 10% bleach solution and most common laboratory detergents and cleaning agents. The outer shell can be cleaned with alcohol, 10% bleach solution, and most common laboratory detergents and cleaning agents.
Cooling on ice
Place CoolRack LV module directly on ice in an ice bucket. The CoolRack LV module will adapt to
Ice-free cooling
For short-term cooling (approximately three hours): Use CoolRack LV module in a CoolBox MP ice-free cooling system. (NOTE: the CoolRack LV module is tall and will not allow the CoolBox MP lid to close. However, the CoolRack LV module is insulated, thus providing similar performance to a closed CoolBox MP. If lid closure is important, please see CoolBox XT below.)
For long-term cooling (approximately 10 hours): Use CoolRack LV in a CoolBox XT or CoolBox 2XT ice-free workstation. Because the CoolRack LV module has an insulative outer shell, it is not necessary to close the lid of the CoolBox XT to achieve maximum cooling duration. However, if lid closure is important to your application, please order a CoolBox XT Extension Collar to extend the height of the CoolBox XT workstation and allow the lid to close.Made in USA.
Dimensions (L x W x H): 13.7 x 9.4 x 9.7 cm / 5.4 x 3.7 x 3.8 in
CoolRack XT M-PCRCoolRack XT M-PCR 模块,可放置12个1.5ml/2.0ml离心管和6个连管,尺寸:L12.7*W8.6*H3.8cm 。可以消除样品刚放入冰、干冰、酒精浴、水浴等常用实验室温度源时,温度的不均一性。将CoolRack模块直接放入温度源,模块会迅速适应其温度(从-196℃到+100℃)。它确保所有样品在冷却、冷冻或者加热/融化过程中保持+/-0.1℃的温度均一性。所有模块都可高压灭菌或者酒精消毒。CoolRack模块可以直接放置在冰/干冰上,消除样本管直接与冰的接触,不容易污染,还可以和CoolBox搭配使用,直接放置在冷却核心上,方便保持样本保持低温数小时。SBS-footprint. Holds 12 x 1.5 or 2.0ml microcentrifuge tubes and 6 rows of PCR strip wells. Thermo-conductive sample modules for use in ice, dry ice, liquid nitrogen or heat sources. Maintains temperature through direct contact with ice, dry ice, water, liquid nitrogen or other common laboratory temperature sources. Use for cooling, (snap)freezing or heating/thawing samples.
SBS-footprint makes this module ideal for benchtop cooling, then quick transfer to automated platforms for approximately 10-20 minutes of cold processing.
Use ice-free in CoolBox XT workstations. Made in USA.
Dimensions (L x W x H): 12.7 x 8.6 x 3.8 cm / 5.0 x 3.4 x 1.5 in